Plastic: | |
---|---|
Production: | |
Production time: | |
Availability: | |
Quantity: | |
Plastic PP HDPE PET Density Separation Color Sorting Material Separator Crushing Separating Recycling Line
Project system:
By this system, the different plastics could be crushed and the springs, ferrous and nonferrous and some sinking materials in the water could be separated.The material and color sorting system will make different materials and different colors well separated.After getting separated,the plastics will be sent to make granulating by the plastic pelletizing line.
The whole system including 4 parts:
Plastics crushing/washing/separation drying line
Plastics color sorting system
Plastics material sorting system
Plastics die face pelletizing recycling line
1.Plastic crushing water density separating line:
By this line,the plastics could be crushed into small flakes in well controlled sizes by screen hole. A magenet device with strong power for remove the irons from the plastic flakes before sending the plastics into sinking-floating tank.
The water density will separating the PP PE and other heavily plastics.You will choose which side to recycle depending on your materials.
In the end of this line,it is equipped with a dryer and label remover to ensure the fully separation of plastics.
2.Double Belt Plastic Color Sorting Machine
I. Project introduction:
By color sorting machine, the different color flakes could be separated.
II: Features
Full color CCD camera: | Adopting full color CCD of high resolution with 2048 pixels, easily able to recognize tiny color |
Computer operating system
| In order to separate materials with different colors, we use a computer to operate the main machine, Compared with the former touch screen, our computer operating systems has user-friendly interface, higher resolution equipped with muti-functional picture acquisition system. |
Long life LED light source | With uniform color and long life, the use time of LED light is ten times more than that old fluorescent tube.
|
Real-time display of actual material image
| All real-time image monitor helps easily define the rejection and acceptance, higher improve the sorting accuracy. |
High sorting
| Uniform and stable belt conveyor speed making good quality |
accuracy, Lower damage ratio | products and impurities move at the same speed, which is useful for accurately sorting and its sorting accuracy is much greater than that of traditional chute-type color sorter. |
Lower optimized carryover | Adopting particular image processing technology, lowering optimized carryover for raw materials and reducing unnecessary losses for customers. |
3.Plastic Flakes Electrostatic Separator
Project introduction:
By this line, the hand pumps could be crushed and the springs, ferrous and
nonferrous and some sinking materials in the water could be separated.
4.PP HDPE Material Die Face Pelletizing Recycling Line
Project introduction:
By this line,the separated flakes with different materials will be melted and granulating into small loop pellets.
About us:
RETECH MACHINERY is a professional manufacturer focusing on R&D and marketing the plastic recycling machines.With very rich experience in this field with more than 15 years,we keep innovating and optimizing on machinery.
Welcome contact us with no hesitation.
info@plasticrecycling-machine
Plastic PP HDPE PET Density Separation Color Sorting Material Separator Crushing Separating Recycling Line
Project system:
By this system, the different plastics could be crushed and the springs, ferrous and nonferrous and some sinking materials in the water could be separated.The material and color sorting system will make different materials and different colors well separated.After getting separated,the plastics will be sent to make granulating by the plastic pelletizing line.
The whole system including 4 parts:
Plastics crushing/washing/separation drying line
Plastics color sorting system
Plastics material sorting system
Plastics die face pelletizing recycling line
1.Plastic crushing water density separating line:
By this line,the plastics could be crushed into small flakes in well controlled sizes by screen hole. A magenet device with strong power for remove the irons from the plastic flakes before sending the plastics into sinking-floating tank.
The water density will separating the PP PE and other heavily plastics.You will choose which side to recycle depending on your materials.
In the end of this line,it is equipped with a dryer and label remover to ensure the fully separation of plastics.
2.Double Belt Plastic Color Sorting Machine
I. Project introduction:
By color sorting machine, the different color flakes could be separated.
II: Features
Full color CCD camera: | Adopting full color CCD of high resolution with 2048 pixels, easily able to recognize tiny color |
Computer operating system
| In order to separate materials with different colors, we use a computer to operate the main machine, Compared with the former touch screen, our computer operating systems has user-friendly interface, higher resolution equipped with muti-functional picture acquisition system. |
Long life LED light source | With uniform color and long life, the use time of LED light is ten times more than that old fluorescent tube.
|
Real-time display of actual material image
| All real-time image monitor helps easily define the rejection and acceptance, higher improve the sorting accuracy. |
High sorting
| Uniform and stable belt conveyor speed making good quality |
accuracy, Lower damage ratio | products and impurities move at the same speed, which is useful for accurately sorting and its sorting accuracy is much greater than that of traditional chute-type color sorter. |
Lower optimized carryover | Adopting particular image processing technology, lowering optimized carryover for raw materials and reducing unnecessary losses for customers. |
3.Plastic Flakes Electrostatic Separator
Project introduction:
By this line, the hand pumps could be crushed and the springs, ferrous and
nonferrous and some sinking materials in the water could be separated.
4.PP HDPE Material Die Face Pelletizing Recycling Line
Project introduction:
By this line,the separated flakes with different materials will be melted and granulating into small loop pellets.
About us:
RETECH MACHINERY is a professional manufacturer focusing on R&D and marketing the plastic recycling machines.With very rich experience in this field with more than 15 years,we keep innovating and optimizing on machinery.
Welcome contact us with no hesitation.
info@plasticrecycling-machine